Miran Micro-Mounted Ultrasonic Displacement Sensor External Non-Contact Measurement Displacement Sensor

• Type: Rotary Angle Encoder
• Output Signal Type: Analog Type
• Movement: Angular Displacement
• Production Process: Ultrasonic Sensor
• Material: Aluminum
• Accuracy Grade: 0.1%
• Model NO.: MCSB1000-U-B/MCSB1000-I-C
• IP Rating: IP67
• Certification: ISO
• Customized: Customized
• Item: Mcsb1000-U-B/Mcsb1000-I-C
• Effective Length: 60-1060mm
• Voltage - Supply: +15-30V DC
• Standard Test Board: 60mm*42mm*38mm
• Working Current: 20mA
• Protection Degree: IP67
• Independent Linearity: ±0.1%
• Output Signal: 0~5V,0~10V,4~20mA,RS485
• Operating Temperature: -40~+70ºC
• Transducer Frequency: 200kHz
• Transport Package: Carton
• Specification: Aluminium Case
• Trademark: MIRAN
• Origin: China
• HS Code: 8543709990
• Production Capacity: 9999999

Product Description

Product Description

Miran Ultrasonic ranging module  ultrasonic sensor 

MIRAN MCSB ultrasonic distance sensor is a kind of mechanical wave whose vibration frequency is higher than that of sound wave.It's development depends on the theory that the transducer crystals chip vibrates under the excitation of voltage and then combine with the characteristics of ultrasonic wave. It has the characteristics of high frequency, short wavelength, small diffraction phenomenon, especially good directivity, and be the directional propagation of radiation. 

Applications

Distance measurement, liquid level measurement, height measurement, interval measurement, size measurement, material accumulation height measurement, filler level measurement, filler level detection,Diameter and Speed Measurement, Profile Measurement, Tension Control, Packaging Detection, Object Counting etc. 



Parameter

Measuring range	50~1000mm
Blind area	60mm
Standard test board	300x300mm
Resolution	0.35mm(max)
Beam angle	10-15°
Linearity	0.1%
Frequency	200KHz
Working voltage	15~30VDC
Ripple voltage	5%
Power consumption	20MA
Output signal	0~10V
Working Temperature	-20°C~+60°C
Storage temperature	-40°C~+70°C
Line Length	2m
Response time	100ms
Housing material	Nickel plated brass
Protection	IP67
Note:Ultrasonic Transduce is used for Distance measurement, level measurement, height measurement, interval measurement, dimensional measurement, material stack height measurement, fill level measurement, fill level detection,   Diameter and speed measurement, contour measurement, tension control, package inspection, object counting, etc.

Model Instruction



Product size drawing (unit :mm)

Installation

Firstly, the sensor is electrified, and the red and yellow lights behind the sensor will light up.
Yellow light means: yellow light is unchanged, the object is within the measurement range; Blinking yellow light ,Set object detected in the set function state.
                                              
Red light means : red light is always on, power is on; long dark, error red light flashing ,No object detected in the set  function state.

This sensor has two analog output modes (rise and fall modes) as shown below:
A: Setting the farthest distance P2:
1. Place a test object where you want to set the distance.
2. Pry the gray line (adjustment line) and the brown line (power supply) together , during this time if the measured object is captured, the yellow light will always flash. After this state lasts for four to five seconds, please removed the gray line. The setting is successful.
 
B Set the nearest distance P1:
1. Place a test object where you want to set the distance.
2, please tie the gray line (adjustment line) and the blue line (power supply negative) together. during this time, if the measured object is captured, the yellow light will always flash. After this state lasts for four to five seconds, pls removed the white line. The setting is successful.
 

Note:

The yellow light and the red light may flash together during the setting process, indicating that the sensor does not accurately capture the measured object. Need us to move the sensor slightly to align the measured object.Until the yellow light flashes continuously. (Please noted that this setting process must be completed within 3 minutes, otherwise the sensor will be locked. If the sensor is locked ,you need to disconnect the power supply and re-power. Then reset it).  
 

Company Profile







Company Information

My Dear Friends,welcome to visit our company!

 

Shenzhen Miran Technology Co., Ltd. is the largest Linear Position Sensor manufacturer in China.

Since 2003 we have been developed and produced Linear Position Sensor(brand:MIRAN,LinecSKI,WANSUNGM),Wire Rope Potentiometer,Magnetostrictive Liquid Level Sensor,Angle Sensor,Lubricating Pump(Oil/Grease/Butter),LVDT,Eddy Current Sensor, and many other Motion control products to support many different industries.

Our Products have been widely used in injection molding machines,die casting machines,rubber machines,footwear machines,EVA injection machines,bottle blowing machines,woodworker machines, hydraulic machinery,level control, suspension stroke control,construciton machinery,seaport machinery,industrial robots,etc.

 

We can offer you the competitive advantage products.

We also support to put your logo on the products if you need.

 
Please find the product you need and confirm the order.
If you cannot find what you need,please leave a message with your email or 
 

 

Hope we can build up the long-term and harmonious business relationship!
Wish you have a happy shopping and visit us again!