| Customized: | Customized |
|---|---|
| Certification: | RoHS, CE, CCC |
| IP Rating: | IP65 |
| Screen Size: | Middle |
| SD Card Memory Size: | None |
| Measuring Medium: | Position Sensor |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| No. | Name | Description |
| 1 | Main display | Displaying the measured value (measuring mode) Displaying the parameter value (configuration mode) |
| 2 | Second display | Displaying the content (such as unit, alarm value) controlled by parameter diS2 (measuring mode) Displaying the parameter value (configuration mode) |
| 3 | Alarm output indicators | Indicating the states of alarm points |
| 4 | Set SET | In the measuring mode: Hold this button for over 2 seconds to enter the configuration mode. In the configuration mode: when a parameter symbol is displayed, hold this button for over 2 seconds to select next parameter category; when a parameter symbol is displayed, press this button to select next parameter; When modifying parameter value, press this button to save the changed parameter. |
| 5 | Left ◃ | In the configuration mode: when a parameter symbol is displayed, press this button to display the parameter value; when modifying parameter value, press this button to select the digit to be revised. |
| 6 | Up Δ | In the measuring mode: press this button to offset the measure value,preference value will be displayed (can be used to enable/disable data retention function during power-off); hold this button for over 2 seconds to restore the reset point to the measured value. In the configuration mode: when a parameter symbol is displayed, press this button to select the previous parameter (hold this button to select the first parameter of this category); when modifying parameter value, use this button to the increase the value. |
| 7 | Down ▽ | In the measuring mode: hold this button for over 1 second to reset the peak-to-valley value to current gross value. In the configuration mode: when a parameter symbol is displayed, press this button to select the previous parameter (hold this button to select the first parameter of this category); when modifying parameter value, use this button to the decrease the value |
| Specification | Rating/Condition | ||||
| Alarm output | Size 160×80 | T1~T4 | Relay output of alarm point 1 to 4; all SPDT contact relays | 250V AC/3A resistive load |
|
| Size 96×48 | T1~T2 | Relay output of alarm point 1 & 2; both are SPDT contact relays | |||
| T3 | Relay output of alarm point 3, which is a SPST contact relay | ||||
| Size 48×48 | T1 | Relay output of alarm point 1, which is a SPST contact relay (when T1 is selected, either the function of communication or retransmitted analog output is available) |
|||
| T2 | Relay output of alarm point 2, which is a SPST contact relay (when T2 is selected, the functions of communication and retransmitted analog output are unavailable) |
||||
| Digital input | K1 | Point 1 digital input (For device of size 160×80 or 96×48, when K1 is selected, either the function of communication or retransmitted analog output is available; for device of size 48×48, K1 input is not valid) |
|||
| Analog output | A1 | Current output (4~20)mA, (0~10)mA, (0~20)mA | Photoelectric isolation; Resolution: 1/3000; Load capacity: 600Ω |
||
| A2 | Voltage output (0~5)V, (1~5)V | ||||
| A3 | Voltage output (0-10)V | ||||
| Communication interface | S1 | RS232 | Photoelectric isolation, Response time: <500μS (tested); Software selectable protocol (TC-ASCII or Modbus-RTU) |
||
| S2 | RS485 | ||||
| Power supply | V0 | 100~240V AC(50/60Hz) | |||
| V1 | 10-24V AC 50/60 Hz;10-24V DC | ||||
| Size (mm) |
Panel dimension (a×b×c) |
Device depth (d) |
Device size (e×f) |
Dimension with bracket included (g) |
Panel cutout size (x×y) |
Mounting bracket position |
| 160×80 | 160×80×10 | 115 | 149×75 | 165 | 152-1×76-1 | Horizontal: left-right Vertical: top-down |
| 96×96 | 96×96×10 | 66 | 90.5×91 | 108 | (92±0.5)×(92±0.5) | Top-down |
| 96×48 | 96×48×11 | 71 | 90×44 | 107 | (92±0.5)×(45±0.5) | Horizontal: left-right Vertical: top-down |
| 72×72 | 72×72×9 | 66 | 67×67 | 84 | (68±0.5)×(68±0.5) | Top-down |
| 48×48 | 48×48×7 | 81 | 44.8×44.8 | 62 | (45.5±0.5)×(45.5±0.5) | Four directions |
| Panel dimension: dimensions of the front panel of the cabinet. Device depth: depth of the device, used as the reference for cabinet depth. Device size: dimension of the cross section of the device, used as the reference for cutout dimension. Dimension with bracket included: vertical or horizontal dimension with mounting bracket considered. Panel cutout size: Recommended cutout size of cabinet panel. All the above dimensions are in mm. |
||||||
My Dear Friends, welcome to visit our company!
Shenzhen Miran Technology Co., Ltd. is the largest Linear Position Sensor manufacturer in China.
Since 2003 we have been developed and produced Linear Position Sensor(brand: MIRAN, LinecSKI, WANSUNGM), Wire Rope Potentiometer, Magnetostrictive Liquid Level Sensor, Angle Sensor, Lubricating Pump(Oil/Grease/Butter), LVDT, Eddy Current Sensor, and many other Motion control products to support many different industries.
Our Products have been widely used in injection molding machines, die casting machines, rubber machines, footwear machines, EVA injection machines, bottle blowing machines, woodworker machines, hydraulic machinery, level control, suspension stroke control, construciton machinery, seaport machinery, industrial robots, etc.
We can offer you the competitive advantage products.
We also support to put your logo on the products if you need.
Please find the product you need and confirm the order.
If you cannot find what you need, please leave a message with your email or
Hope we can build up the long-term and harmonious business relationship!
Wish you have a happy shopping and visit us again!
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}